Nanjing ECO (Tel +86-13813931455 (Wechat/WhatsApp)) Introduction of special filter media for coiled filter-ECOCPS.COM

Product Features:

1. The special filter cotton for the coiled filter is made of organic synthetic fiber or glass fiber by compression and coiling. The back of the filter material has a strong woven mesh, which is not easy to deform; the super elastic fiber structure will not be affected by large wind resistance. The filter material is compressed together to affect the dust holding capacity;

2. The filter cotton is sprayed with a special adhesive, which further strengthens the ability to catch ash;

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like Iraq, Afghanistan, Somalia, South Sudan. Mobile: +86-13813931455(WhatsApp) Website: www.hiclover.com Email: sales@hiclover.com Email: hicloversales@gmail.com

3. It can withstand temperature up to 120°C, and the filter cotton has a long service life, and it does not need to be replaced frequently to reduce the cost;

self-winding filter

technical parameter:

model

material

thickness

Wind speed (m/s)

Average weighing efficiency (EN779)

Initial resistance (pa)

Final resistance (pa)

Dust holding capacity (g/m2)

filter level

Standard size (m)

AFS-60

synthetic fiber

15mm

2.0

80

25

200

500

G3

2x20m, 1x20m

AFG-60

glass fiber

50mm

3.9

95

10

130

1850

G4

Replacement Notes:

1. For the sake of life safety and equipment maintenance, two people are required to cooperate with each other when replacing the filter material to avoid the situation that the filter material is tilted during winding;

2. When pressing the door lock, you need to hold the new filter box by hand to prevent it from falling suddenly;

3. When replacing the filter material, pay attention to the winding direction, from the left side, it is wound down counterclockwise, see the previous figure;

4. Before the new filter material passes through the upper filter material adjustment tube, the filter material must pass under the square tube pressing frame, see the previous figure;

5. When replacing the filter material, it needs to be pulled down at a constant speed and slowly;

6. Regularly check the transmission part, adjust the size of the sprocket to make it on the same working plane, and give the chain regularly.


 

https://ecocps.com/?p=74607

Categories: